Lexmark

Lexmark MX931dse, Secondhand in Sydney

The Lexmark MX931dse in one line: A3 black and white photocopier, 35 pages per minute. No colour, so there is one rate to watch: mono copying, printing and scanning up to A3. Secondhand ones come renewed, refurbished or used; every machine is checked, and its page count is yours in writing before you commit.

  • 35 pages per minute on A4
  • A3 black and white: print, copy, scan
  • Three secondhand grades
  • On agreement: replaced if it fails
Lexmark MX931dse photocopierImage courtesy of the maker

The short version

Lexmark built the MX931dse as an A3 black and white photocopier running at 35 pages per minute, within its MX93x series, dating from 2022. From the maker's sheet, it tops out at 55 scanned images a minute, loads 620 sheets as standard and 5,140 fully optioned and feeds card up to 256 gsm.

35 pages per minute in A3 black and white, secondhand with the page count in writing.

The specs

The MX931dse by the numbers

Figures as the maker publishes them. Each secondhand machine is checked first, and its page count is yours before you commit.

Page size
Up to A3
Pages per minute
35 on A4
Scans per minute
Up to 55 images through its reversing feeder
Paper on board
620 sheets; 5,140 with options fitted
Thickest stock
256 gsm
Maker's monthly guide
20,000 pages
Fax
Available as an option
Time to first copy
6.4 seconds
Finishing
Optional inline stapler or staple punch finisher
Size and weight
590 mm wide, 699.3 deep, 767.9 high; roughly 53 kg
Launch year
2022
How to pay
Rent, lease or buy outright

Will it keep up with your office?

Our rule of thumb: it suits somewhere between five and fifteen people. Keep it to 20,000 pages a month or fewer, on Lexmark's recommendation.

Secondhand: grades and payment

Every secondhand MX931dse is checked before we offer it, and its page count is given to you in writing. Rental or lease terms reach 60 months on younger machines and run shorter on older ones, or you can pay outright. Delivery, network connection, scanning set up and a hands on run through for staff are part of the price, anywhere in greater Sydney.

Whatever we sell, we service, and this MX931dse is no exception. On a service agreement, one that fails is swapped for a working machine during the term. Rental on selected machines is priced from $15 a week plus GST, once finance is approved.

Secondhand? Check these first

  • The meter reading. Pages printed so far, in writing. That number beats the build year as a guide to wear.
  • What comes with it. Extra trays, a finisher, a big paper deck: each one alters the work it can take and the figure on the quote.
  • Who looks after it. We do not sell a machine we cannot service, because a copier nobody can fix is no bargain.
  • Running cost. Get the mono and colour rates per page in writing, plus what each rate covers.
Quicker by phoneAsk the question, get a plain answer, then decide.Monday to Friday, 8am to 5pm
(02) 8313 0670Get a price
About the Lexmark MX931dse

Unsure it fits? Ask before you decide

Describe the work it has to do, or give a model number. Back come two or three options, each priced in writing. No obligation.

Or ring (02) 8313 0670, Monday to Friday, 8am to 5pm.

Want figures on the Lexmark MX931dse?

One line is enough. You hear if one is in, its page count and the numbers, in writing. Send it on a business day and you hear back that same day.

Asking about: Lexmark MX931dse

Phone instead: (02) 8313 0670. We do not sell contact details. Privacy.

Replacement warranty

What if it fails? We replace it. Any year of the agreement.

If a machine on our service agreement fails, we replace it. That holds for new and secondhand machines alike, and for every way of paying: rental, lease, finance or an outright purchase. The cover lasts as long as the agreement does, every year of it.

A new copier normally carries the maker's warranty for 12 months, covering hardware but not consumables. Once that year is up, the service agreement carries the cover. The full terms of the replacement warranty are written into your agreement.

Questions

What people ask about the Lexmark MX931dse

How much wear is on a secondhand MX931dse?

No two are the same. The count for the unit you are offered comes in writing, and it is the best single guide to wear.

What is the MX931dse's monthly page limit?

20,000 pages a month is Lexmark's recommended figure, and 150,000 is the rated maximum for a single month.

Can the MX931dse go on a rental agreement?

Yes, once finance is approved. Selected machines can be rented from $15 a week plus GST. When the term is up, you move to a newer machine or hand this one back; send us the model for the written figures.

Sydney Copiers

A straight answer takes one call.

Which machine, which grade, what it costs to run, what to watch for in the agreement: ask. Monday to Friday, 8am to 5pm. Send an enquiry on a business day and you hear back that same day.

(02) 8313 0670 Get a price